Writing tips and writing guidelines for students,case study samples, admission essay examples, book reviews, paper writing tips, college essays, research proposal samples
Thursday, October 31, 2019
Mercy killer Essay Example | Topics and Well Written Essays - 1500 words - 1
Mercy killer - Essay Example The cases were recorded in Zurich, information was obtained by the medical facilities and letters by the dead patients were analyzed to find out and understand the cause which led them to take such decisions (Fischer 334). While conducting this study, the researchers were able to find out and analyze the causes given both by the physicians and the patients who were supposedly in severe pain due to the disease and hence they took the decision of performing and undergoing euthanasia. Also, some of the reasons were long-term disability of the patients due to some neurologic disorder or accidents that caused the patients to require long-term care i.e. for years or even permanent disability leading them to a life that is relied completely on others. Other reasons include a mutual decision taken both by the patients and their physicians in whom the patients had the right to control their death, they thought they have lost the right to live, some patients think that they cannot live further or perform their daily chores and are now relying on others and that is affecting their dignity as well as living a life of no reason, they chose to end their lives (Fischer 336). During the research, the researchers were able to identify physical, social and psychological reason as the main ones behind opting for euthanasia. It was further concluded that physicians who perform euthanasia are supposed to report cases which are medical in nature because the law of Zurich demands a medical professional to report a case undergoing euthanasia due some medical reasons that led a patient to opt for it. Also, demographic factors were identified between patients who opted to undergo euthanasia. Gender was another factor identified behind the reasons for opting euthanasia. It was observed that male population did not report pain but loss of control
Tuesday, October 29, 2019
How did women's fashions change in the 1920's Have these styles Research Paper
How did women's fashions change in the 1920's Have these styles survived or ever been revivied How do they reflect the new fre - Research Paper Example The designs, colours and fabrics and the associated accessories used by fashion technologists are not to be seen merely as expressions of random ideas or creativity. They, in fact, are meant to make statements; statements of joy, liberation, individuality, functionality, self-expression and post-war optimism. The fashion trends of the hedonistic 1920s assume importance in this light and the most wonderful thing about those well-coordinated outfits was the enormous freedom they gave women ââ¬Ëto chooseââ¬â¢. Women are the loveliest creation of god and now they were to become even lovelier. The music of 1920s was a trendsetter and so were the new fashion modules of the period, their ââ¬Ëclassicalââ¬â¢ nature notwithstanding. They were simple, yet elegant carrying with them timeless and age-defying sex-appeal. Any discussion on womenââ¬â¢s fashion in the colorful 1920s has to be centered on close-fitting cloche hats without rims, sleeveless dresses, slipper shoes, sheer s tockings, Madeleine Vionnetââ¬â¢s very feminine bias-cuts, pantsuits, canes, body-flattering Coco Chanel silhouettes and Art Deco fashion with its integration of the Oriental culture, not to mention La Garconne style, handbags, jewellery and such things so much so that any attempt to visualize their appeal by taking a look at black-and-white snapshots of that period does not just work. 1920s, more commonly known the ââ¬Ëroaring 20sââ¬â¢, as much as 1940s, both being points of time that have witnessed not only the horror of World Wars but also the serenity that the end of hostilities marked, were historically prone to see a sea change in terms of peopleââ¬â¢s attitude and womenââ¬â¢s in particular in terms of the idea of fashion. The first short skirt sounded the death knell of the haute couture era [Skirt length reached its lowest point in 1923 (1920s Fashions for Women)] and ushered in the modern era of fashion which conceived the idea of erotic beauty. The transform ation of woman from being an object of beauty to becoming a futurist machine was kick-started. ââ¬ËChicââ¬â¢ became a vogue word. And there was no looking back. So we see the cumbersome Victorian clothing gradually losing ground. Crinolines, rear-enhancing bustles and restrictive corsets passed into oblivion, thankfully causing a steep decline in the incidence of ptosis. Lighter, brighter and daringly shorter dresses, straight-line chemises, nemo-flex brassieres, sleek, masculine or boyish look, flat chests with bandeaus, shingle cut and Bubikopf or the bob cut (popularized by actress Louise Brookes) formed the order of the day. The Basque dress or Robe de Style which clubbed the features of straight silhouette and belled skirt was very popular. Make up, in particular, was another ââ¬Ëshockingââ¬â¢ development. Rising hemlines of the flappers, who characterized the revolutionary spirit of the typical jazz age woman, made dancing the Charleston, for instance to a tune of Duke Ellington or to the frenetic sounds of Bix Beiderbecke, easier. Light weight undergarments made it easier to play sport and drive automobiles. The Womenââ¬â¢s Fashion Institute designed the ââ¬Ëone hour dressââ¬â¢ in 1926 (Flapper Fashion). For the first time in history, pleats, gathers and slits ruled womenââ¬â¢s fashion, liberating women from constricting clothes, though the Great Depression, for a while, brought about a roll-back towards conservative wear (The History of 20th Century
Sunday, October 27, 2019
Entity relationship diagram model of georgeâââ‰â¢s garage
Entity relationship diagram model of georgeà ¢Ã¢â ¬Ã¢â ¢s garage Introduction Relationship between one or more then one entity of tables by pripary key and foreign key is called as Entity Relationship diagram model. This documentation will be on Entity Relationship diagram model of Georges Garage. Database Information Tables of the Garage Database Garage Database gives information of the table Name with Primary key and Foreign Key. 1)Ncar_sale Pk: Ncar_id 2).ShCar_Sale Pk:- ShCar_id 3).VehicleSale Pk: Sale_id Fk:- Ncar_id , ShCar_id, Dept_id 4) Car_auction Pk : au_id Fk:- SHCar_id 5) Car_Workshop Pk: Workshop_id Fk : dept_id, Car_servise_id 6) Car_servise Pk : Car_servise_id FK :- Payment_id , Parts_id 7) Servise_payment Pk : Payment_id Fk : Staff_id 8) Car_Parts Pk : Parts_id 9) Customer Pk : cust_id 10) Parts_Sale_Stock Pk : Parts_sale_id Fk : parts_id, cust_id 11) Parts_order Pk : Order_id FK : parts_id 12) Suplier Pk :- Suplier_id Fk :- Order_id 13) Department Pk :- Dept_id 14) staff Pk : Staff_id FK : dept_id 15) Vehicle_Booking Pk :- Booki_id Fk :- Cust_id 16) Vehicle_Hire Pk : Hire_id Fk : Booki_id, Dept_id 17) Valeting_Servise Pk : Valeting_servise_id FK : booki_id, 18) Car_Hire Pk : Car_Hire_id 19) Vehicle Pk :- Vehicle_id Fk : booki_id, Car_Hire_id 20) Sp_Car_Hire Pk :- Sp_Car_id Fk :- Vehicle_id 21) Rolls_Roys Pk : Rr_Car_id Fk : Sp_Car_id 22) Limousines Pk : Li_Car_id Fk : Sp_Car_id 23) Minibus Pk : Mb_Car_id Fk : Sp_Car_id Entity Relationship Diagram Concepts Keys * Primary Key :- Primary Key is a key that uniquely identify value of the table Example:- In payment table, Payment_id is a primary key. Create table Servise_payment ( payment_id varchar(5) NOT NULL CONSTRAINT carser_pk PRIMARY KEY, ) * Foreign Key :- Foreign Key is a key thats indicates the primary Key of the another table Create table Car_servise ( Payment_id varchar(5) NOT NULL CONSTRAINT spayme_fk FOREIGN KEY REFERENCES Servise_payment(payment_id) ) * Example :- In Car_Service table, Payment_id is a foreign Key which point out another Payment_id of the Payment table Entity Collection of Attributes is known as Entity. In sql, parson table is a entity and Person_id, Person_name, person_Address and Person_BOD is a attributes of person. Assume Genaral This database on the George garage therefore it contains all information of the garage.there are twenty three tables which are connected with each other.. a. Some of the employee have same amount of salary because they may work in same department and same position. b. Some Cars Hire date are similar because different car might hire in same date. c. Some tables have Integer data type or float data type due to Price of part and seat of car respectively. Spacial 1)Ncar_sale This Ncar tables contains detail of sales of the new cars 2).ShCar_Sale This table store information about second hand car. 3).VehicleSale This table keeps records of the New car and Second hand car sale. This table acts as sale department 4) Car_auction Car auction table keeps record of car auction information. Second hand car used in car auction 5) Car_Workshop This is Workshop department table. This table store data of car services in the workshop. 6) Car_servise This table gives information about service of the one car. Its also gives information about parts which are used in service, Payment and type of service. 7) Service_payment This payment table store payment information of each Service. 8) Car_Parts Car parts table contain details of each Parts of the car. Some car parts also order from the supplier. 9) Customer This table store customers information. 10) Parts_Sale_Stock This table is use for store information of parts sale 11) Parts_order Parts order table contains parts order data. 12) Suplier This table used to store information about Supplier 13) Department Department table contain all department information 14) staff this table gives information of the all staff of the departsment 15) Vehicle_Hire This table is a Hire department table which store booking information. 16) Vehicle_Booking This table used to book hire vehicle information as well as valeting Service information. 17) Valeting_Servise This table keeps records of the valeting service. 18) Car_Hire Car hire tables contains information about only cars and Vans 19) Vehicle This Vehicle table store detail of the hire vehicles such as Car and special vehicle. 20) Sp_Car_Hire Car hire tables contains information about only special vehicle such as Minibus, Rolls Roys and Limousines. 21) Rolls_Roys Rolls Roys table contain information about rolls roys special vehicle.Rolls Roys is used for occation 22) Limousines Limousines table contain information about rolls roys special vehicle. Limousines used for wedding and night outs 23) Minibus Minibus table contain information about Minibus special vehicle. This table keeps records of Airport pickup 5 Syntaxes. Create Syntax Create Syntax is used in sql which is for create table. Create Syntax is used in the data Definition language(DDL). For Example :- This syntax for create Vehicle_sale table. Create table Vehicle_Sale ( Sale_id int(3), New_car_sale_id varchar(5), Secondhandcar_sale_id varchar(5), Staff_id varchar(5) ) Insert Syntax Insert Syntax is used in sql which is for Insert value in the table. Insert Syntax is used in the data Manipulation language(DML). For Example : This syntax for insert value in the Vehicle_sale Insert into Vehicle_Sale values(S01,Car01,sh01,em01); Index Systax Index used for make search process easily and fast For example : In employee table, each employ has their own phone number and it is unique
Friday, October 25, 2019
Eddie Carbone in A View From the Bridge by Arthur Miller Essay
Eddie Carbone in A View From the Bridge by Arthur Miller The play ââ¬Å"A view from the bridgeâ⬠is set in Red hook area of New York, the play was written by a man called Arthur Miller he wrote this particular play in 1950 at the age of 35. His parents were immigrants in the United States of America, they had lived a wealthy life this all went wrong along with the American economy. Arthur Miller worked as a warehouse man, and in order to save his fees he went to Michigan University in 1934, to study economics and history. He did a course in playwriting and this became his ambition, he graduated from Michigan University in 1938. Eddie Carbone is the main character in the play, at the start of the play he is a very popular hardworking man then towards the end of the play he becomes a very angry distressed and jealous, and eventually loses his life by getting stabbed by his own knife. Eddie is mainly responsible for his own downfall because he didnââ¬â¢t want Catherine (his niece) to get married to her lover, Rodolfo. Rodolfo and Marco (his brother) are staying with the Carbones as illegal immigrants. Eddie becomes angry because he believes that Rodolfo is taking Catherine away from him this leads him to betray his family by reporting them to the immigration bureau. I think that ââ¬Å"A view from the bridgeâ⬠is a tragedy because of eddies extreme downfall, he dies because of one mistake. Throughout the play Eddie is jealous of Catherine because she is not his little girl anymore she is turning into a woman. Eddie is an Italian longshore man working on the New York docks. When eddies wifeââ¬â¢s cousins, Marco and Rodolfo seek refuge, as i... ...to prevent. I think Eddie is mainly responsible for his own downfall but Catherine could have played some part in causing it because of her getting together with Rodolfo. Eddie never liked Rodolfo from when he first met him he always thought he was weird. Rodolfo also may be responsible for eddies downfall because he never asked eddies permission to get together with her. Marco is Beatriceââ¬â¢s cousin and after Marco and Rodolfo have been in jail they get bailed out and Marco goes after Eddie. Eddie is alone at this stage Marco hits Eddie lunges at Marco with a knife that is meant to kill him. Beatrice tells Eddie to stop but Eddie ignores her like he does throughout the whole play. Then as the knife is in eddies hand it is grabbed by Marco turned and drove into eddies body, within two minutes Eddie carbone is dead.
Thursday, October 24, 2019
Proceedings of Healthy Buildings 2000, Vol 1
Proceedings of Healthy Buildings 2000, Vol 1 629 PRODUCTIVITY AND INDOOR ENVIRONMENT Derek Clements-Croome1 and Li Baizhan2 University of Reading, Department of Construction Management and Engineering, UK Jukes Associates, UK ABSTRACT Surveys in several office buildings have shown that crowded work places, job dissatisfaction and physical environment are the main factors affecting productivity. the data was produced and analyzed using occupational stress indicator in conjunction with the analytical hierarchical process. hermal problems, stuffiness, sick building syndrome factors and crowded work places were most frequent complaints. the results suggest that the productivity could be improved by 4 to 10% by improving the office environmental conditions. KEYWORDS: SBS, productivity, thermal comfort, perceived air quality, stress INTRODUCTION It is much higher cost to employ people then it is to maintain and operate a building, hence spending money on improving the work environment is t he most cost effective way of improving productivity because of small percentage increase in productivity of 0. % to 2% can have dramatic effects on the profitability of the company. The current state of knowledge on this subject is described by Clements-Croome [1]. Practical applications of some of this knowledge is described by Oseland and Barlett [2] METHODS This research focuses on the relationship between productivity and the indoor environment in the offices and takes into account the fact that productivity depends on other factors by using an Occupational Stress Indicator (OSI) which has been developed to include an environmental dimension [3,4].OSI is a job satisfaction scale involving question or statements, asking respondent to state what they think or feel about their job as whole or specific aspects of it. Likeret scaling using five, seven or nine point scales is usually used. The OSI has been demonstrated by Arnold [5]. The occupational stress indicator is designed to g ather information about groups as well as individuals and it attempts to measure the major sources of occupational pressure; occupational stress; coping mechanisms and individual differences which may moderate the impact of stress.An environmental dimension has been built into this indicator covering temperature, ventilation, humidity, indoor air quality, lighting, noise, crowded work space and is referred to as EPOSI which has been used to gather information about the occupants in the buildings that have been surveyed. This method of self assessment provides valuable information on individual as well as group responses. The data from the questionnaire is analyzed using the analytical hierarchy process (AHP) originated by Saaty[6]. AHP uses nine point judgement scales for use with detailed questionnaires aided by semi-structured interviews.The method is based on the theory of 630 Exposure, human responses and building investigations hierarchies and is a way of structuring complex mu lti-dimensional systems, by analyzing the interaction between elements in each stratum of the hierarchy in terms of their impact on elements in the stratum immediately above. It is possible to have several levels of hierarchies, but in this case five have been selected beginning with productivity followed by human factors; system factors; health factors; environmental factors. The questionnaires were answered by occupants across various work grades and tasks and were designed to elicit: background information about the organization and the workplace â⬠¢ how much the environment and the job cause dissatisfaction â⬠¢ the feelings of the subject about their current working situation â⬠¢ the principle causal factors influencing health symptoms of occupants â⬠¢ which factors influence job satisfaction and productivity Semi-structured interviews were carried out to establish more details about attitudes and reasons behind responses. Office survey A detailed environmental s urvey was carried out at an office in Reading in 1996. he questionnaire was in five sections: Section A The Questionnaire asks the occupants to judge the physical factors in the environment covering temperature, stuffiness and draughts, dryness, indoor air quality, sunlight, lightning, noise and vibration, and crowded workplaces. Questions were also asked about personal health; job stress; job satisfaction; an overall opinion about the indoor environment; including questions about five categories of sick building syndrome covering sensory irritation; skin irritations; nervous problems; nasal and odor complaints. Section BThe questionnaire concerned subjects views on how they liked the office layout and decoration as well as questions about their job in relation to productivity. They are also asked to rate how much personal control they felt had over temperature and lighting. Four questions were asked to determine self assessed productivity covering the amount of work accomplished; q uality of work; feeling of creativity; and degree of responsibility. Section C The questionnaire was concerning information which describes the characteristics of the organization, workplace and some personal information.Occupants were then asked about human factors such as well-being; ability to perform; motivation; job satisfaction and technical competence. Finally there was a group of questions concerned with indoor environment; weather; outdoor view; organizational factors; occupational factors; facilities and service; and personal factors. Proceedings of Healthy Buildings 2000, Vol 1 631 Section D The questionnaire was based on information gathered using EPOSI and five major human factors were identified which influence productivity ( well-being, ability to perform, motivation, job satisfaction, technical competence).Six system factors ( indoor environment, weather and outdoor views, organizational aspects, occupational issues, facilities and services, personal aspects) were ex amined to see how they influenced the human factors. Section E The questionnaire covered interactions between sick building sickness symptoms and an array of personal, occupational and environmental factors. RESULTS Analysis of the data shows that the level of productivity by self assessment reduces as the workspace becomes more crowded, as job dissatisfaction increases and as overall dissatisfaction of the indoor environment increases. he results lead to the overall conclusion that an average the self assessed productivity could be improved by about 10% by improving the office environmental conditions. The Spearman rank-correlation coefficient, rs, was used to assess measure of association between any two variables. The statistical analyzes of the results is given in detail by Li [7]. It was shown that a significant rank-correlation exists between self-assessed productivity and environment, job dissatisfaction and job stress, as shown in Table 1. Table 1. The association between se lf assessed productivity, environment and job factors.Factor Associated Factor Spearman RankCorrelation Coefficient Self-assessed productivity Unsatisfactory indoor -0. 49 environment Job dissatisfaction -0. 36 Job stress -0. 21 Unsatisfactory indoor Job stress +0. 31 environment Job dissatisfaction +0. 43 Job stress Job dissatisfaction +0. 36 There is unique relationship between the individual, the environment and the building they inhabit. Satisfaction with the environment. satisfaction with the environment arises from a number of issues apart from personal health (r=0. 34), sick building syndrome symptoms (r=0. 5), visual and aural problems (r=0. 36), thermal problems (r=0. 49), and crowded work space (r=0. 50). The correlation coefficients were statistically significant for p F? = 0,01 [3, 152] = 3. 92 ) (1) This indicates that subjects who suffer from physical environmental factors will suffer an increase in overall unsatisfactory environment which is positively related to ther mal problems, crowded workspace and sick building syndrome symptoms. The multiple regression equation for job satisfaction was found to be: JD = 1. 2055 + 0. 3157* JS + 0. 2572 * En + 0. 1023 * CS r = 0. 5367, F=19. 56> F? = 0,01 [3,149] = 3. 92 ) (2) This shows that high job dissatisfaction results from job stress, crowded workspace and an overall unsatisfactory environment. For self assessed productivity, the regression equation was developed using a step wise regression procedure: P=6. 8510-0. 3625*En-0. 1542*JD-0. 1329*CS (r = 0. 5083, F= 14. 86 > F? = 0,01 [3, 132] = 3. 94 (3) The principal factors which affect self assessed productivity in the offices surveyed were an overall unsatisfactory environment, crowded workspace and job dissatisfaction.A distinction was made between direct effects (i. e. those effects that do not result from any other variable in the model) and ââ¬â secondary or indirect effects which arise from the interaction between one or more variables in the model. (Cohen 1983). For example an overall unsatisfactory environment has a direct effect on self assessed productivity, but there is also an indirect effect because it also affects job satisfaction which in turn also affects self assessed productivity.The total indirect effect is estimated by the product of the effects of an overall unsatisfactory environment on job satisfaction, and job satisfaction on self assessed productivity. The total effect of environment on self assessed productivity is then the result of combining the direct and indirect effects. Further analyzes showed that the most common complaints about unsatisfactory environments were those connected with high or low temperature variations; stale and stuffy air; dry or humid air. Proceedings of Healthy Buildings 2000, Vol 1 633 CONCLUSIONSThe principal conclusions were: â⬠¢ â⬠¢ â⬠¢ â⬠¢ â⬠¢ â⬠¢ â⬠¢ â⬠¢ Individual responses illustrate that the majority of respondents believed that the o ffice environment had a direct influence on their well-being and self assessed productivity. When dissatisfaction with the environment and job were high there was a low level of self assessed productivity. Results showed that there were more occupants suffering from an overall unsatisfactory environment than from job stress and job dissatisfaction. People may be wholly satisfied with their job, but could also be quite unhappy about their work environment.In general however people reporting negative attitudes towards the environment were also the people with high job stress and job dissatisfaction. Crowded workspaces, thermal problems, and sick building symptoms due to whatever cause were the principal complaints about unsatisfactory environments. Nearly two thirds of the occupants thought that a 10% or more increase in their productivity was possible by improving the office environment. Results of the analysis also indicated that self assessed productivity could be improved by about 10%.Further analysis using the AHP model illustrated that the ability to perform, and wellbeing, were the two most important human factors that influenced the productivity of occupants in the offices surveyed. These factors together with job satisfaction and indoor environment form a virtuous cluster which is highly important in designing creative workplaces. In this study there was a small effect of the outdoor environment on productivity but this was insignificant compared to the effect of the indoor environment.Indoor air quality and pollution were the most important environmental factors influencing sick building syndrome. Compared with other personal factors (e. g. gender and type A behavior) and occupational factors, job stress was the next most significant factor which gave rise to sick building syndrome symptoms.. Results showed that the primary factors influencing productivity varied between organizations, and also between buildings or offices within the same building. Thi s research has established a reliable methodology for evaluating self assessed productivity. SymbolsCS En F JD JS p P r rs SBS Th ââ¬âââ¬âââ¬âââ¬â Crowded working space (7 score) An overall unsatisfactory indoor environment (7 score) For statistical F-test Job dissatisfaction (7 score) Job stress (7 score) The level of statistical significance Self assessed productivity (9 score) The correlation coefficient Spearman rank-correlation coefficient Suffer from SBS symptoms (7 score) Suffer from thermal conditions (7 score) 634 Exposure, human responses and building investigations REFERENCES: 1. Clements-Croome, D. J. , 2000, Creating the Productive Workplace, Spon Routledge. 2.Oseland, N. , Bartlett, P. , 1999, Improving Office Productivity, Longman. 3. Cooper, C. L. , 1998, Occupational Stress Indicator Management Guide, NFERNelson, Windsor. 4. Clements-Croome, D. J. , Li B. , 1995, Impact of Indoor Environment on Productivity, Workplace Comfort Forum, Royal Institute o f British Architects, London. 5. Arnold, J. , Cooper, C. L. , Robertson, I. , (1998), Work Psychology: Understanding Human Behaviour in the Workplace, 3ra Edition, Financial Times-Pitman Publishing. 6. Saaty, T. L. , 1972, Analytic Hierarchy Process, McGraw-Hill, New York. 7. Li, B. 1998, Assessing the Influence of Indoor Environment on Self Reported Productivity in Offices, Doctor of Philosophy Thesis, Department of Construction Management and Engineering, University of Reading. 8. Raw, G. J. , et al. , 1989, Further Findings From the Office Environment Survey, Part I: Productivity, Building Research Establishment, Note No. N79/89. 9. Anderson, D. , et al. , 1990, Statistics for Business and Economics, 4th Edition, West Publishing Company, USA. 10. Cohen, J. , Cohen, P. , 1983, Applied Multiple Regression ââ¬â Correlation Analysis for Behaviourial Sciences, 2â⬠³d Edition, Lawrence Earle Baum Associates, New Jersey/London.
Wednesday, October 23, 2019
Kurt Cobain and Nirvana
Nirvana is seen as one of the most influential bands since the Beatles, and Kurt Cobain as one of the greatest songwriters of all time. Kurt Donald Cobain was born on the 20th February 1967. As a child he was hyperactive so he was prescribed drugs to help him concentrate but these drugs kept him awake until four am, so he was given sedatives to help him sleep. At the age of seven his parents divorced, this left Kurt shy and ââ¬Ëdifficult' to control. For this much of his young life he lived with various family members, once he even lived with his school headmaster for a few months. He was also homeless for some time. During this time he lived beneath a bridge. This period of his life is reflected in the song ââ¬ËSliver' ââ¬Å"Mom and dad went to the show, they dropped me at Grandpa Joe's, I kicked and screamed, said please and please, oh Grandma take me homeâ⬠. In 1979 when Kurt's dad joined a record club, this exposed Kurt to legendary rock/metal bands such as Led Zeppelin, Black Sabbath and Kiss. He also took an interest in British punk, especially Sex Pistols and The Clash. On Kurt's fourteenth birthday he bought his first guitar and spent a lot of time trying to develop his own unique musical style. He also spent much of his time going to concerts in Seattle and he was a roadie for a band called ââ¬ËMelvins'. Around this time Kurt went over to his friend Robert Novoselic's house where he met Robert's brother Krist, the future bass guitar player for Nirvana. Krist Anthony Novoselic was born on May sixteenth 1965 in Compton California. His parents were Croatian immigrants (Novoselic means ââ¬Ënew settler' in Croation). When Krist was younger he and his younger brother Robert enjoyed vandalism, slashing tyres and throwing rocks at cars and houses. When he was fourteen his parents sent him to Croatia because they were worried about his depression, Krist enjoyed living in Croatia because there he started hearing different bands like Black Sabbath, Led Zeppelin, The Sex Pistols and The Ramones. Eventually he was called home where he began to drink and smoke pot heavily. It is not definitely known when Kurt and Kris began making music, but they recorded the ââ¬ËFaecal Matter Demoâ⬠in 1982 at Kurt's aunt Mari's house. Kurt and Kris experimented with many different drummers during this time they settled on Chad Channing, he was their drummer on their first album ââ¬ËBleach' and on their first single ââ¬ËLove Buzz' (which was originally released by 1960's Dutch group ââ¬ËShocking Blue'). He left the band soon after their first European tour. Then the lead singer of ââ¬ËMelvins' introduced Kurt and Kris (by now calling themselves ââ¬ËNirvana') to a drummer called David Grohl. Kurt and Kris were astounded at how good he was and immediately asked him to join them. He agreed. With Dave now behind the drums the true sound of Nirvana was released. They managed to combine loud distorted guitar riffs with smooth melodies while still producing a sound that, while totally original, was also a pleasure to listen to. The band moved their contract to Geffen Records and near the end of 1991 released their album ââ¬ËNevermind'. It went to one hundred and forty-four on the album chart, but after an appearance on the MTV show ââ¬ËHeadbanger's Ball' (MTV was the only music channel that had alternative music, and this show in particular was one of the most popular MTV programs ever) and a live performance on ââ¬ËSaturday Night Live', the album went straight to number one despite competition from Michael Jackson. This new album was revolution in music, and did what many other bands could not. The music on the album did not follow any traditional structures and was extremely distinctive from any other bands of the time. Typically the album had slow verses and faster choruses. This is true of such songs as ââ¬ËSmells Like Teen Spirit' and ââ¬ËIn Bloom' which were both released as singles. ââ¬ËSmells like Teen Spirit' reached the UK top ten (Nirvana did appear live on Top of The Pops once, but that particular performance was extremely distorted and did not sound much like ââ¬ËSmells Like Teen Spirit'). This could be because Kurt did not like his new fame and wanted to rid himself of his new image as spokesman for a generation). At this time in his life Kurt began taking drugs more often, mostly heroine and morphine. On the January twenty-fourth 1992 Kurt married Courtney Love in Waikiki, Hawaii. Six months later their daughter ââ¬ËFrances-Bean' was born. At the time there was an article in the magazine ââ¬ËVanity Fair' saying that Courtney had used Heroin while pregnant. Social services got involved and the Cobains were not allowed to be alone with their daughter for the first month of her life. Soon after, Nirvana began to record their album ââ¬ËIn Utero', the working title was ââ¬ËI Hate Myself and Want to Die'. The aim of this album was to lose all of the ââ¬Ëfalse fans' that liked Nirvana only because of the popularity of ââ¬ËNevermind', and all of the people who only liked ââ¬ËSmells Like Teen Spirit'. This album was a return to the old days of ââ¬ËBleach' (in fact many of the songs were supposed to be on ââ¬ËBleach'). The album was a success, in that it did what the band wanted, it did not sell as quickly as ââ¬ËNevermind' and many of their former followers stopped liking the band. While on tour in Italy Kurt fell into a coma after a mixture of champagne and a prescripted medicine. This was later revealed as an attempted suicide. When he woke up he asked for a milkshake and went back home. Courtney threatened to divorce him if he did not sort out his drug problems so he went to a voluntary rehabilitation centre. A few days later he escaped (jumping over a wall) and went to his house (he said the centre was ââ¬Å"A place for retardsâ⬠). When Courtney found out he had left she did not know where he had gone. She cancelled his credit card and expected him to phone her when he ran out of money. She also hired private investigator Tom Grant to track Kurt down. About a week later Kurt's body was discovered in the greenhouse above the garage. After a police investigation they concluded that he had taken a triple overdose of heroin and then put the barrel of a shotgun in his mouth, before pulling the trigger. In the suicide note (addressed to his childhood imaginary friend Boddah) he spoke of how he did not really enjoy performing his music. He wanted to be exhilarated like Freddie Mercury had been before playing a concert, but he couldn't do it. He also did not want his daughter to turn out how he did. In the end he says to remember ââ¬Å"It's better to burn out than to fade awayâ⬠which is exactly what he did.
Tuesday, October 22, 2019
Sonnet 116 Theme Analysis Essay Essays
Sonnet 116 Theme Analysis Essay Essays Sonnet 116 Theme Analysis Essay Paper Sonnet 116 Theme Analysis Essay Paper ââ¬Å"Sonnet 116â⬠. William Shakespeareââ¬â¢s most celebrated sonnet. describes the tests true love faces. but besides how no affair what. love is an of all time present hope. Love is invariably being tested through outside forces. and timeââ¬â¢s ineluctable influence upon it. For love to work and be strong. the twosome must ââ¬Å" [ a ] dmit impedimentsâ⬠and defects as clip goes on. and jobs occur ( 2 ) . These hindrances can be the breakage point for a twosome. or they can turn in assurance through them. Love that ââ¬Å"alters when change findsâ⬠will neer hold the strength to confront lifeââ¬â¢s many obstructions together ( 3 ) . These obstruction will include efforts to ââ¬Å" [ flex love ] with the remover to removeâ⬠. through things such as households and distance ( 4 ) . For illustration. love ââ¬Å" [ T ] hat looks on tempestsâ⬠will fall into the enticement of false love and promises ( 6 ) . Along with people. clip wants to to the full act upon love. Equally long as ââ¬Å"Loveââ¬â¢s non Timeââ¬â¢s foolâ⬠. the love has a opportunity at endurance ( 9 ) . Time is an of all time present clock that can normally have on down on a relationship. Even when love is ââ¬Å" [ tungsten ] ithin his flexing sickleââ¬â¢s compass comeâ⬠. the trial donââ¬â¢t terminal ( 11 ) . Equally long as love grows. there will ever be challenges act uponing it. from the minute it begins to the minute infinity starts. To two people. love is an of all time present hope for the remainder of the universe. It is ââ¬Å"an ever-fixed markâ⬠on the skyline and in the Black Marias. supplying a feeling needed to do it through the challenges life throws at us ( 5 ) . It is really much the visible radiation in the dark that people refer to during difficult times. After a long twenty-four hours or hebdomad. love ââ¬Å"is the starâ⬠that gets us through the mess things may experience like ( 7 ) . That particular feelingââ¬â¢s ââ¬Å"worthââ¬â¢s unknown. though its tallness be takenâ⬠because no 1 else can of all time be genuinely understand two peopleââ¬â¢s devotedness for each other ( 8 ) . Love besides gives ââ¬Å"rosy lips and cheeksâ⬠to the people it effects ( 9 ) . Love shows life in one of its purest signifiers. Love will ââ¬Å"bear out. even to the border of doomâ⬠. to the last breath and beyond if it is true love ( 12 ) . William Shakespeare believes that if what he wrote ââ¬Å"be mistake [ â⬠¦ ] no adult male of all time lovedâ⬠in the true sense of being in love. The love that is true in all signifiers. through the tests and to the really best minutes.
Monday, October 21, 2019
How to Write a Winning Nursing Scholarship Essay Essays
How to Write a Winning Nursing Scholarship Essay Essays How to Write a Winning Nursing Scholarship Essay Essay How to Write a Winning Nursing Scholarship Essay Essay Essay Topic: Scholarship How to Write a Winning Nursing Scholarship Essay Writing an effective essay is one of the most essential components of a successful scholarship search. In fact, many scholarship awards are based solely on the quality of the essay. The following are some tips to remember when writing a nursing scholarship essay. Prepare a clear outline for your essay. Nursing scholarship programs are looking for essays that present a clear thought pattern. You can make sure that your scholarship essay is presented in a clear manner by creating a simple outline. Your outline should include three main parts, the introduction, body and conclusion. The introduction should capture your readersââ¬â¢ attention and introduce the main points you will discuss in your essay. The body of your essay should be broken out into several paragraphs that present the main points of the essay. The main points should be supported with facts, thoughts, ideas, quotes and other material which will hold your readersââ¬â¢ interest. The conclusion of your essay should restate the main idea of your essay. It is also effective to refer to the future in the conclusion of a scholarship essay. You can do this by discussing your future career goals in the nursing field, or by stating a specific aspiration which you hope to achieve during your nursing career. Use proper grammar, spelling and punctuation. It is always important to use proper grammar, spelling and punctuation in writing a scholarship essay. Although the nursing profession may not require you to study grammar and spelling, it is essential that you avoid any simple errors in your essay. Ensuring that your essay is free of mistakes will make you look professional and leave a positive impression on the judges. Write in response to the scholarship requirements and purpose. Be sure that your essay responds to the scholarship requirements. Some scholarships may require that you intend to practice in a certain field of nursing, that you work in a certain area, or that you attend a certain nursing program or school. Your essay should clearly identify how you meet these requirements. Do as much research as you can about the scholarship program and the organization that is offering the scholarship. Organizations typically give away scholarships to promote certain interests or purposes. Make sure that you highlight the ways in which your career goals will fit with the scholarship programââ¬â¢s purpose. Answer any questions thoroughly. If the scholarship program has requested that your essay address certain questions, make sure you answer these questions clearly and thoroughly. This is often an easy way to for judges to weed out applications that donââ¬â¢t fit the award criteria. Your essay must respond to any questions which are asked, or it is likely that it will not be given consideration. Be original. Your essay will be among hundreds or even thousands of others, all from other nursing students who have the desire and ability to succeed in the nursing profession. If your essay does not stand out, it will be overlooked. To be original, you can either find a unique essay topic, or you can write about an ordinary topic and approach it in an original way. When you are trying to come up with original ideas for your essay, think about your own unique personality and experiences. What is it that made you decide to enter the field of nursing? What life experiences will you contribute to the nursing field? Spend some time thinking about what makes you unique as a nursing student and future nurse. This will help you to think of an original topic or approach. Be cautious when recycling essays. In your scholarship application process, it is likely that you will be able to use parts and pieces of essays for more than one scholarship application. However, you should not merely write one or two general essays and send them out with every scholarship application. Remember, the judges who choose the scholarship winners are looking for an essay that is original and responds to the purpose and goals of the scholarship program. If you tailor each of your essays to the particular nursing scholarship you are applying for, you will have a much greater likelihood of success. Get a second (or even third or fourth) opinion. After you have finished writing your essay, be sure to review it with at least one more person. You can ask your friends, family members, teachers, or professors to be your editors. When others review your essay, they can find errors and suggest possible improvements. You should review your essay with at least one other person, but it is even better if you can find three or more people to review your essay. Follow these guidelines, and you will be able to write an original, professional and effective essay that gives you an edge over the competition.
Saturday, October 19, 2019
Applying Ecological Principles for Koala
Ecology has been defined as the branch of science that deals with the biotic and abiotic environment surrounding an organism. It takes into accounts the different types of relationships prevailing between an organism and their immediate surrounding and the environment. The study of ecology emphasizes on the significance of such relationships on sustainability of organism. Various ecological principles are set for maintain an optimum natural environment and ensure the safety of endangered species of Australia. Our current report focuses on a particular animal of Australia, the Koala, which is considered to be one of the threatened species in the country. The report elaborates the ecology of the concerned animal, the relevant ecological issues concerning the species and tries to manifest how ecological principles can be applied in order to create a sustainable environment for conservation of our chosen animal species. The scientific name of the animal is Phascolarctoscinereus. Following is the detailed taxonomic classification of the animal: Kingdom: Animalia; Phylum: Chordata; Sub-phylum: Vertebrata; Class: Mammalia; Sub-class: Marsupialia; Order: Diprotodontia; Sub-order: Vombatiformes; Family: Phascolarctidae; Genus: Phascolarctos; Species: Cinereus(Iucnredlist.org, 2016). It is classified as Animalia because of its capability of locomotion and its multicellular and heterotrophic characteristics. Presence of Spinal cord classifies it as Chordate and Vertebrate. Koalas produce milk to feed their young ones, hence they are Mammals. Presence of pouches to carry their young ones qualifies them as Marsupials. The arrangement of their teeth on the jaw and fusion of the second and third digits in its back paw puts it in the order Diprotodontia. Koala is the only still existing member of its family Phascolarctidae. Several characteristics like type and number of teeth and digits are considered to classify it into this family. Considering the features of its urogenital tract, spermatozoa, karyotype and serology it is stated to belong to the genus Phascolarctos.Ecology of Koala Koalas are one of the few animal species of Australia that solely depend on the foliage of Eucalyptus for the source of energy and nutrient. However, specific species of eucalyptus are preferred by the animal and accordingly their population is distributed with their preferred tree species.In general Koalas have a sedentary lifestyle and are solitary animals. Most of them live in overlapping home ranges, which aid them in the process of mating. Both males and females start mating at an age of around two to three years and generally give birth each year. Over-browsing of trees has been a sustainability issue in many areas, which has led to undertaking of several actions like habitat protection, fertility suppression and translocation (Mc Lean 2003). Studies have shown that the tree species koalas use for resting are not necessarily the same species they use for feeding purposes and hence studying their feeding patterns are somewhat difficult (Marsh et al 2014).It has been reported that Koala population increased dramatically in the late 1800s and suffered a considerable decline in the late 1900s due to ecological factors. Currently Koalas are found in Queensland, New South Wales, the Australian Capital Territory, Victoria and South Australia (Melzer et al 2000). In most of the regions the animal has been declared to be Vulnerable by the Australian Government. Koalas were declared to be a threatened species in the Environment Protection and Biodiversity Conservation Act 1999 (EPBC Act) by the Australian Government. Further the International Union for Conservation of Nature (IUCN) has declared Koala to be a ââ¬Å"Potentially Vulnerableâ⬠species(Savethekoala.com, 2016). Several ecological factors have been identified that have a direct impact on the survival of the animal. Loss of habitat is the most significant of all the issues in this regard. Expansion of human settlement and demands of modern life like roads, factories, agriculture and housing has caused much loss of the wildlife habitats where the animals were already found. Due to increased human population, subsequent increase in cars and dogs has turned to be a serious threat to the animal species. Around 4000 koala deaths have been reported to be caused by cars and domestic dogs each year (Cork et al 2000). It has been reported that Koalas suffer from various diseases such as conjunctivitis, pneumonia, urinary tract infection and reproductive tract infection that might lead to infertility. Chlamydia is most prevalent pathogen found to be affecting the species (Waugh et al 2016). Other threats faced by koalas are bushfires and danger from other wild animals. Ecology deals with the interactions and interrelationships at various levels ranging from populations and communities to ecosystems and biospheres. Populations comprise interbreeding groups of animals belonging to the same species and inhabiting in the same habitat. When populations of different species interact, communities are formed. Ecosystems are the abiotic and biotic components of a predefined area that influences all the populations and communities of that region. Biosphere includes all the biological and physical processes that directly or indirectly influence life on Earth. Several ecological principles play an important role in maintaining a harmony between all the components of an ecosystem. Ecological interdependence is a key factor that determines the survival of a species. Despite of dynamic changes in the ecological systems each and every species residing in a particular area are dependent on other animals and plants. This dependence arises mainly from the food chain and for obtaining energy and nutrients. Each component of an ecosystem aims at reaching goals that are beneficial for the whole and any organism that acts against this notion is considered as a disturbing factor for the overall ecological harmony. Human beings play a huge role in altering ecosystems by changing the physical environment of the same and disturbing the residing organism of the particular region. This proves to be detrimental to the human species itself on the long run. It has been already discussed that changes in the habitat is the most concerning ecological issue for koalas, where human play a significant part(Little et al 2007).Loss of habitat can cause longstanding impacts on the intera ction between the biotic components of an ecosystem. Human intervention must be stopped to conserve the Koala habitats. This can be done by forming certain legislations and laws on part of the government and thus restricting human impact on concerned regions. Koalas solely thrive on eucalyptus plants that too on certain species of the plants are preferred by the animal. Loss of habitat may lead to loss of certain species of the plant essential for survival of Koalas. Disruption of the food chain due to such losses is often life threatening for animals species. Even natural disturbances affect the population and species of an ecosystem. Natural disturbances can influence the shape sizeà à à à à à à à and distribution of ecosystems and subsequently thre animal species residing there. The intensity and frequency of forest fires have shapes ecosystems in several regions of the earth. Composition and structure of habitats need to be studied at a landscape level to get an insight about the impacts of natural disturbances. For terrestrial ecosystems the species and community composition and the patch size distribution are of utmost relevance. Bushfire have caused much harm to Koalas consistently. Certain measures are necessary to prevent such fires and deaths of the vulnerable species. Chlamydial diseases in Koalas continue to be one of the most common diseases occurring in the animal (Timms 2005). The causes of preventable disease caused by Chlamydial infection needs to be identified and preventable measures should be taken to avoid further deaths due to such causes. Koalas of Australia are already considered a vulnerable species. Several ecological factors that influence the habitat and consequently their survival of the species have been addressed. Loss of habitat being the most determining factor for the decline in the animal population in recent years needs immediate attention. The indispensible step that needs to be taken is preventing and/or restricting impact of humans on the habitat of the animal. Certain natural disturbances like diseases and bushfires needs to be studied to figure out preventive measures. The role of the government is crucial in this regard. Laws and guidelines must be set considering the significance of the alarming situation. After formulation of such laws the government must ensure effective implementation of the same in order to reach the desired goals.à Bioweb.uwlax.edu. (2016).Classification. [online] Available at: https://bioweb.uwlax.edu/bio203/s2007/mundt_meli/classification.htm [Accessed 22 Oct. 2016]. Cork, S.J., Clark, T.W. and Mazur, N., 2000. Introduction: an interdisciplinary effort for koala conservation.à Conservation Biology,à 14(3), pp.606-609. Iucnredlist.org. (2016).Phascolarctoscinereus (Koala). [online] Available at: https://www.iucnredlist.org/details/16892/0 [Accessed 22 Oct. 2016]. Little, G., Lau, T.A., Cypher, A., Lin, J., Haber, E.M. and Kandogan, E., 2007, April. Koala: capture, share, automate, personalize business processes on the web. Inà Proceedings of the SIGCHI conference on Human factors in computing systemsà (pp. 943-946). ACM. Marsh, K.J., Moore, B.D., Wallis, I.R. and Foley, W.J., 2014. Continuous monitoring of feeding by koalas highlights diurnal differences in tree preferences.à Wildlife Research,à 40(8), pp.639-646. Mc Lean, N., 2003.à Ecology and management of overabundant koala (Phascolarctoscinereus) populationsà (Doctoral dissertation, The University of Melbourne). Melzer, A., Carrick, F., Menkhorst, P., Lunney, D. and John, B.S., 2000.Overview, critical assessment, and conservation implications of koala distribution and abundance.à Conservation Biology,à 14(3), pp.619-628. Savethekoala.com. (2016).The Koala - Endangered or Not? | Australian Koala Foundation. [online] Available at: https://www.savethekoala.com/about-koalas/koala-endangered-or-not [Accessed 22 Oct. 2016]. Timms, P., 2005. Chlamydial infection and disease in the koala.à Microbiology Australia,à 26(2), pp.65-68. Waugh, C., Hanger, J., Timms, P. and Polkinghorne, A., 2016. Koala translocations and Chlamydia: Managing risk in the effort to conserve native species.à Biological Conservation,à 197, pp.247-253. With a decade's experience in providing essay help,
Friday, October 18, 2019
Interaction with other professions and how it has informed my Essay
Interaction with other professions and how it has informed my understanding of inter-proffesional care and my practice in relati - Essay Example During my practice, I received input from fellow nursing student. However, I have also received numerous inputs from the wards, OTs and the Physiotherapy. This reflective essay focuses my interactions with other professions, how the interactions have informed my understanding of inter-professional care and my practice in relation to patient centeredness. The case I will reflect on involved an elderly female patient who was living alone. She was admitted into the hospital after she fell at home. Because of the fall, the patient had limited mobility. For diagnosis, she underwent an x-ray. The x-ray revealed extensive damage on the knee. However, the damage had not resulted from the fall but was due to severe arthritis. She was not going to be considered for a knee replacement mainly due to her age. After checking on the family background, it was unfortunate that the lady had alienated her family and completely severed all contact. Additonally, the lady had no contact with her neighbors and had live most of her old age life alone relying on herself. She had bad relations even with members of the society. The bad relations with other people could be attributable to her character. This is because the old lady is prone to making accusations against all the people she meets. The lady wished to return to her home. Therefore, the Occupational Therapist (OT) had to do a home assessment to ensure that the environment was appropriate. After the assessment, the OT felt that there was need for a significant clear out of the ladyââ¬â¢s home. This is because the lady would have to use a pulpit for mobility purposes. The device is quite large and the lady would have to live in the living room. Although the lady insisted on being left to go back to her residence, I felt that such an arrangement would not function appropriately for a long period, since she had no relations. The OT had another challenge. Nobody was willing to help in the clearing out the house since the lady ha d severed all the relation she ever had. Moreover, the physical condition she was in could not allow her to do the clearing since she needed to use a wheelchair, which she had not yet received. The only solution was for the patient to employ a solicitor and give him the power of an attorney to oversee the implementation of all the needed changes. Another problem that the OT had noticed was the nonfunctional fire alarm in the ladyââ¬â¢s home. When she told me about it, I suggested for a complete fire inspection by the local fire brigade. After the inspection, the fire brigade put the patientââ¬â¢s name in the register of the vulnerable people and those with mobility issues. Although the OT wanted us to get the lady a personal alarm, it was impossible at that moment since the three people in the community were required to be used as contact. However, no one was willing to be involved with anything to do with the old lady. Therefore, the OT suggested a small mobile house phone th at could be carried with the pocket. Following my interaction with the OT, the old sick lady, the community and other different professions, I was able to understand the significance of interactions between nurses
Atrial Fibrillation Article Example | Topics and Well Written Essays - 500 words
Atrial Fibrillation - Article Example Possible causes that give rise to AF include comorbidities like hypertension, coronary ischemia, heart failure and obstructive sleep apnoea. The characteristic features of electrical remodelling are alterations in atrial refractoriness, atrial conduction and sinus node function. This happens very quickly and is considered possible to reverse. Loss of contractility results from the contractile remodelling that happens in AF and like electrical remodelling happens very quickly. Reduction in the release of systolic calcium ions is believed to contribute to this change. Myolysis or the loss of sarcomeres is also a likely candidate for this change. The consequences of contractile remodelling are thrombus formation and atrial dilation. Advance of AF may be caused by contractile remodelling through the coexistence of multiple wavelets. Reversing contractility changes takes longer than in the case of reversing electrical remodelling changes possible because of the time involved in the replacement of lost sarcomeres. Persistent AF has been associated with the structural changes within the atria. Many of these changes are consider ed to be irreversible. Evidence from animal studies suggests that these changes occur more slowly than the changes that occur from electrical and contractile remodelling and primarily reflect dedifferentiation. The striking changes seen in animal models are increased cell size, myolysis, and the collection of glycogen around the nucleus of the cell. From the limited data from humans there is indication that degenerative changes may occur (Cohen & Naccarelli, 2008). Management of AF is a three pronged strategy. The first is of the prongs is anticoagulation. Use of anticoagulation is guided by the CHAD scoring system set forth by the American College of Cardiology, American Heart Association, and the European Society of cardiology. When the AF patient has any one of these
Technology Management Blog Essay Example | Topics and Well Written Essays - 500 words
Technology Management Blog - Essay Example The book, Service Strategy explained that "in simplest sense, it [ROI] is the net profit of an investment divided by the net worth of the assets invested," and that "the resulting percentage is applied to either additional top-line revenue or the elimination of bottom-line cost." (TSO 2007, p. 112) It is easy, hence, to understand how in service management, ROI came to be considered as a benchmark to determine the ability of an organization to use assets in order to generate more value. For example, when financial managers develop and introduce a service to the market, there is no telling whether it can provide financial returns to the investment. Using ROI, however, the management can predict, examine and analyze product/service performance not just after service delivery but also early in the process, such as during the planning stage. What this means is that financial managers can either integrate value-added services or improve on existing ones depending on the stage of a given p roject or strategy. The above point is significant because service strategy is all about analyzing trends, looking at whether strategies, policy and standards introduced achieve their goal or are viable. (VHP 2007, p. 199) ROI can be crucial in several techniques to analyze trends and performance such as the Component Failure Impact Analysis, Fault Tree Analysis, Service Failure Analysis and so forth. Finally, ROI also plays an important part in identifying opportunities. This is demonstrated in the capacity management technique, which analyzes when which customer uses what services, how they use them and how this influences the performance of one or more systems or components. (VHP, p. 199) ROI enables managers to measure whether a product or service meet a specific or numerical criterion. A problem with the way ROI is used in financial management and in service strategy phase, particularly, is when ROI calculations are focused
Thursday, October 17, 2019
Professional future Assignment Example | Topics and Well Written Essays - 250 words
Professional future - Assignment Example In making application for the course I have discovered that there are set of laws which must be all followed to absorb into the course. One is that you have to be a registered nurse. Second is that you must be a practicing registered nursing student with a nursing degree. Thirdly, you must complete the CNRN certification application and paid a specific fee before submitting the copies to the concerned individuals. Individuals who attain this certification can work in a number of places, including hospitals, health care clinics, brain injury units and intensive rehabilitation unit (Carpenito & Fry, 2014). I will begin my course or individual study of my future career of being a registered Nuero-registered nurse sometimes during may next year. This will form one of my best moments in life as I will be sure that my dreams are coming true and this will be after my application for neuroscience nursing in an institution in Chicago (McKinney,
HSM Performance Optimization Essay Example | Topics and Well Written Essays - 7500 words - 1
HSM Performance Optimization - Essay Example Based upon the expected performance demands, this thesis proposes an optimized HSM solution to address the identified performance gap between what is required and what current HSMs can provide. The thesis describes tests and performance measurements that can be used to optimize applications of the proposed solution for HSM (or similar) devices. Security Assertion Markup Language - Is an XML-based open standard data format for exchanging authentication and authorization data between parties, in particular, between an identity provider and a service provider. I pass my gratitude to Professor XXXX who worked tirelessly to see me through the entire degree project process. The company supervisor, CCCC, also deserves a pat on their back for his counsel and guidance during the design period. Finally, my family has been with me from the start to the end. There is no other way to say thank you, but I am sincerely grateful. A study of the e-ID system was started by the Swedish government on 17th June 2010 and the complete report of this research was published on December 2010. The report identified a solution for which an Agency under the Ministry of Enterprise was established starting of 1 January 2011[2]. The acquisition of operations, management of metadata records of all members, guide service, and the test federation associated with a Swedish Federation of e-identification providers was initiated with it first phase in 2013. The request for quotation process ended with only a single quote (from Cybercom Sweden AB), hence this firm eventually got the contract. The operation of a centralized signature service was initiated in 2014.
Wednesday, October 16, 2019
Technology Management Blog Essay Example | Topics and Well Written Essays - 500 words
Technology Management Blog - Essay Example The book, Service Strategy explained that "in simplest sense, it [ROI] is the net profit of an investment divided by the net worth of the assets invested," and that "the resulting percentage is applied to either additional top-line revenue or the elimination of bottom-line cost." (TSO 2007, p. 112) It is easy, hence, to understand how in service management, ROI came to be considered as a benchmark to determine the ability of an organization to use assets in order to generate more value. For example, when financial managers develop and introduce a service to the market, there is no telling whether it can provide financial returns to the investment. Using ROI, however, the management can predict, examine and analyze product/service performance not just after service delivery but also early in the process, such as during the planning stage. What this means is that financial managers can either integrate value-added services or improve on existing ones depending on the stage of a given p roject or strategy. The above point is significant because service strategy is all about analyzing trends, looking at whether strategies, policy and standards introduced achieve their goal or are viable. (VHP 2007, p. 199) ROI can be crucial in several techniques to analyze trends and performance such as the Component Failure Impact Analysis, Fault Tree Analysis, Service Failure Analysis and so forth. Finally, ROI also plays an important part in identifying opportunities. This is demonstrated in the capacity management technique, which analyzes when which customer uses what services, how they use them and how this influences the performance of one or more systems or components. (VHP, p. 199) ROI enables managers to measure whether a product or service meet a specific or numerical criterion. A problem with the way ROI is used in financial management and in service strategy phase, particularly, is when ROI calculations are focused
HSM Performance Optimization Essay Example | Topics and Well Written Essays - 7500 words - 1
HSM Performance Optimization - Essay Example Based upon the expected performance demands, this thesis proposes an optimized HSM solution to address the identified performance gap between what is required and what current HSMs can provide. The thesis describes tests and performance measurements that can be used to optimize applications of the proposed solution for HSM (or similar) devices. Security Assertion Markup Language - Is an XML-based open standard data format for exchanging authentication and authorization data between parties, in particular, between an identity provider and a service provider. I pass my gratitude to Professor XXXX who worked tirelessly to see me through the entire degree project process. The company supervisor, CCCC, also deserves a pat on their back for his counsel and guidance during the design period. Finally, my family has been with me from the start to the end. There is no other way to say thank you, but I am sincerely grateful. A study of the e-ID system was started by the Swedish government on 17th June 2010 and the complete report of this research was published on December 2010. The report identified a solution for which an Agency under the Ministry of Enterprise was established starting of 1 January 2011[2]. The acquisition of operations, management of metadata records of all members, guide service, and the test federation associated with a Swedish Federation of e-identification providers was initiated with it first phase in 2013. The request for quotation process ended with only a single quote (from Cybercom Sweden AB), hence this firm eventually got the contract. The operation of a centralized signature service was initiated in 2014.
Tuesday, October 15, 2019
Comparison of Indirect Cost Multipliers for Vehicle Manufacturing Essay Example for Free
Comparison of Indirect Cost Multipliers for Vehicle Manufacturing Essay Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor The University of Chicago, nor any of their employees or officers, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of document authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof, Argonne National Laboratory, or The University of Chicago. COMPARISON OF INDIRECT COST MULTIPLIERS FOR VEHICLE MANUFACTURING INTRODUCTION In the process of manufacturing and selling vehicles, a manufacturer incurs certain costs. Among these costs are those incurred directly as a part of manufacturing operations and those incurred indirectly in the processes of manufacturing and selling. The indirect costs may be productionrelated, such as RD and engineering; business-related, such as corporate staff salaries and pensions; or retail-sales-related, such as dealer support and marketing. These indirect costs are recovered by allocating them to each vehicle. Under a stable, high-volume production process, the allocation of these indirect costs can be approximated as multipliers (or factors) applied to the direct cost of manufacturing. A manufacturer usually allocates indirect costs to finished vehicles according to a corporation-specific pricing strategy. Because the volumes of sales and production vary widely by model within a corporation, the internal corporate percent allocation of various accounting categories (such as profit or corporate overhead) can vary widely among individual models. Approaches also vary across corporations. For our purposes, an average value is constructed, by means of a generic representative method, for vehicle models produced at high volume. To accomplish this, staff at Argonne National Laboratoryââ¬â¢s (ANLââ¬â¢s) Center for Transportation Research analyzed the conventional vehicle cost structure and developed indirect cost multipliers for passenger vehicles. This memorandum summarizes the results of an effort to compare and put on a common basis the cost multipliers used in ANLââ¬â¢s electric and hybrid electric vehicle cost estimation procedures with those resulting from two other methodologies. One of the two compared methodologies is derived from a 1996 presentation by Dr. Chris Borroni-Bird of Chrysler Corporation, the other is by Energy and Environmental Analysis, Inc. (EEA), as described in a 1995 report by the Office of Technology Assessment (OTA), Congress of the United States. The cost multipliers are used for scaling the component costs to retail prices. ANL METHODOLOGY The ANL methodology described here is based on an analysis concerned with electric vehicle production and operating costs (Cuenca et al. 2000; Vyas et al. 1998). The analysis evaluated the cost structure for conventional vehicle manufacturing and retailing and assigned shares of the manufacturerââ¬â¢s suggested retail price (MSRP) to various cost contributors. Multipliers developed from the ANL methodology are applied to the manufacturing cost of an individual component in order to scale the component cost to the retail price. Several cost contributors are included in the methodology, as summarized in Table 1. Some of the vehicle components for electric and hybrid electric vehicles would be procured from outside suppliers. This assumption is applied to electric drive components, excluding the battery; the vehicle manufacturer would produce the rest. Thus, two cost multipliers, one for the components manufactured internally and the other for outsourced components, are necessary to estimate the price of electric and hybrid electric vehicles. Outside suppliers would incur some of the costs normally borne by the vehicle manufacturer. In the ANL methodology, we assume that the costs of ââ¬Å"Warranty,â⬠ââ¬Å"RD/Engineering,â⬠and ââ¬Å"Depreciation and Amortizationâ⬠are borne by the Page 1 suppliers of outsourced components. The outside suppliers would include these costs in their prices. The following two cost multipliers are computed by using ââ¬Å"Cost of Manufactureâ⬠as the base: Cost multiplier for components manufactured internally = 100/50 = 2. 00. Cost multiplier for outsourced components = 100/(50 + 6. 5 + 5. 5 + 5) = 1. 50. Table 1 Contributors to Manufacturerââ¬â¢s Suggested Retail Price in ANL Methodology Cost Category Cost Contributor Relative to Share of Cost of Vehicle MSRP Manufacturing (%) Vehicle Manufacturing Cost of Manufacture 1. 00 50. 0 Production Overhead Warranty 0. 10 5. 0 RD/Engineering 0. 13 6. 5 Depreciation and Amortization 0. 11 5. 5 Corporate Overhead Corporate Overhead, Retirement and 0. 14 7. 0 Health Selling Distribution, Marketing, Dealer 0. 47 23. 5 Support, and Dealer Discount Sum of Costs 1. 95 97. 5 Profit Profit 0. 05 2. 5 Total Contribution to 2. 00 100. 0 MSRP METHODOLOGY DERIVED FROM BORRONI-BIRD PRESENTATION In his presentation, entitled ââ¬Å"Automotive Fuel Cell Requirements,â⬠at the 1996 Automotive Technology Development Customersââ¬â¢ Coordination Meeting, Borroni-Bird included charts on the ââ¬Å"Typical American Automobile: Price/Cost Breakdown. â⬠The charts provided a graphical breakdown of vehicle price, showing cost contributors and profit. We used the charts to arrive at percentage shares of vehicle price by various contributors. Table 2 shows the resulting allocation. Page 2 Table 2 Price/Cost Breakdown Based on Borroni-Bird Presentation Cost Category Cost Contributor a Vehicle Manufacturing Fixed Cost Selling Sum of Costs Profit MSRP a Material Cost Assembly Labor and Other Manufacturing a Costs Transportation/Warranty Amortization and Depreciation, Engineering RD, Pension and Health Care, Advertising, and Overhead Price Discounts Dealer Markup Automobile Profit. Relative to Cost of Vehicle Manufacturing 0. 87 0. 13 0. 09 0. 44 Share of MSRP (%) 42. 5 6. 5 4. 5 21. 5 0. 10 0. 36 1. 99 0. 06 2. 05 5. 0 17. 5 97. 5 2. 5 100. 0 These two contributors are scaled to sum to 1 in the third column, as in Table 1. In his presentation, Borroni-Bird did not evaluate the treatment of in-house or outsourced components. His methodology does not lend itself to easy computation of cost multipliers comparable with those in the ANL methodology, unless we make a few assumptions. We have assumed that ââ¬Å"Material Cost,â⬠taken together with ââ¬Å"Assembly Labor and Other Manufacturing Costs,â⬠would form the ââ¬Å"Vehicle Manufacturingâ⬠base for the in-house components. The costs of ââ¬Å"Transportation/Warranty,â⬠ââ¬Å"Amortization and Depreciation,â⬠and ââ¬Å"Engineering RDâ⬠would be borne by the suppliers of outsourced components. However, ââ¬Å"Amortization and Depreciationâ⬠and ââ¬Å"Engineering RDâ⬠costs were merged with ââ¬Å"Pension and Health Care,â⬠ââ¬Å"Advertising,â⬠and ââ¬Å"Overheadâ⬠costs by Borroni-Bird. We assumed that half of the costs under this category would be borne by the suppliers of outsourced components. Our assumptions led to the following cost multipliers: Cost multiplier for components manufactured internally = 100/(42. 5 + 6. 5) = 2. 05. Cost multiplier for outsourced components = 100/(42. 5 + 6. 5 + 4. 5 + 10. 75) = 1. 56. These cost multipliers are very similar to those computed with the ANL methodology. Comparison of ANL and Borroni-Bird Methodologies The information from Tables 1 and 2 is shown in terms of cost categories in Table 3. Both methodologies use vehicle manufacturing cost as the base and add other costs to it. The share of MSRP attributable to ââ¬Å"Vehicle Manufacturingâ⬠is 50% in the ANL methodology, compared with 49% in the Borroni-Bird Methodology. Borroni-Bird combined several cost contributors under ââ¬Å"Fixed Cost. â⬠These contributors include (see Table 2) ââ¬Å"Amortization and Depreciation,â⬠ââ¬Å"Engineering RD,â⬠ââ¬Å"Pension and Health Care,â⬠ââ¬Å"Advertising,â⬠and ââ¬Å"Overhead. â⬠Except for the inclusion of ââ¬Å"Advertising,â⬠ââ¬Å"Production Overheadâ⬠and ââ¬Å"Corporate Overheadâ⬠in the ANL methodology can be combined to form an equivalent category. ANLââ¬â¢s total of 24% by production Page 3 and corporate overheads is slightly lower than the total of 26% by Borroni-Bird. The ANL category of ââ¬Å"Selling,â⬠which includes ââ¬Å"Distribution,â⬠ââ¬Å"Marketing,â⬠ââ¬Å"Dealer Support,â⬠and ââ¬Å"Dealer Discount,â⬠is broader than that of ââ¬Å"Price Discountsâ⬠and ââ¬Å"Dealer Markupâ⬠specified by BorroniBird, and this categoryââ¬â¢s contribution is understandably slightly higher in the ANL methodology. The share of MSRP by ââ¬Å"Profitâ⬠is the same in both methodologies. The absolute differences, computed as ANL value minus Borroni-Bird value, are 1% for ââ¬Å"Vehicle Manufacturing,â⬠ââ¬â2% for ââ¬Å"Fixed Cost,â⬠and 1% for ââ¬Å"Sellingâ⬠cost. Table 3 Comparison of Vehicle Price/Cost Allocation by ANL and Borroni-Bird Methodologies ANL Methodology Cost Contributor or Category Vehicle Manufacturing Production Overhead Corporate Overhead Selling Sum of Costs Profit MSRP EEA METHODOLOGY The methodology of Energy and Environmental Analysis is summarized in the OTA report OTAETI-638, entitled Advanced Automotive Technology: Visions of a Super-Efficient Family Car, published in September 1995. The values of some cost contributors are not listed in the report. Moreover, depreciation, amortization, and tooling expenses are assumed to be case-specific and therefore must be computed for each case. In order to make the EEA and ANL methodologies comparable, some assumptions were necessary. These assumptions are described in the summary below. The EEA cost equations can be simplified as follows: Cost of Manufacture = Division Cost ? [1 + Division Overhead] Manufacturer Cost = [Cost of Manufacture + Assembly Labor + Assembly Overhead] ? [1 + Manufacturing Overhead + Manufacturing Profit] + Engineering Expense + Tooling Expense + Facilities Expense Retail Price Equivalent = Manufacturer Cost ? [1 + Dealer Margin] Borroni-Bird Methodology Share of Cost Contributor or Category Share of MSRP (%) MSRP (%) 50. 0 Vehicle Manufacturing 49. 0 17. 0 Fixed Cost 26. 0 7. 0 23. 5 Selling 22. 5 97. 5 Sum of Costs 97. 5 2. 5 Automobile Profit 2. 5 100. 0 MSRP 100. 0 Page 4 The report lists the following values for overhead, profit, and dealer margin: Division Overhead = Supplier Overhead = 0. 20 (We assume that division and supplier overheads are equal; only the supplier overhead is given in the report. ) Manufacturing Overhead = 0. 25 Manufacturing Profit = 0. 20 Dealer Margin = 0. 25 Because the documentation in the OTA report does not provide values for ââ¬Å"Assembly Labor,â⬠ââ¬Å"Assembly Overhead,â⬠ââ¬Å"Engineering Expense,â⬠ââ¬Å"Tooling Expense,â⬠and ââ¬Å"Facilities Expense,â⬠cost multipliers cannot be computed directly from these data. The ââ¬Å"Assembly Laborâ⬠and ââ¬Å"Assembly Overheadâ⬠share of MSRP is 6. 5% in Borroni-Birdââ¬â¢s presentation. The engineering, tooling, and facilities expenses can be taken as the sum of ââ¬Å"RD/Engineeringâ⬠and ââ¬Å"Depreciation and Amortizationâ⬠from the ANL methodology, at 12% of the MSRP. In deriving the division cost and price relationship below, we use the term Retail Price Equivalent (RPE) from the OTA report instead of MSRP. The RPE can be computed as follows: RPE = = = {[Division Cost ? 1. 2 + 0. 065 RPE] ? 1. 45 + 0. 12 RPE} ? 1. 25 Division Cost ? 2. 175 + 0. 268 RPE Division Cost ? 2. 175/(1 ââ¬â 0. 268) = Division Cost ? 2. 97 Putting ANL and EEA Methodologies on a Common Basis As it was described in the OTA report, the EEA methodology did not provide enough data to compute the cost multipliers. We assumed some cost shares to be the same between the EEA, Borroni-Bird, and ANL methodologies while developing the above relationship between Division Cost and RPE. The EEA methodology is based on the material and labor costs of a division of the vehicle manufacturer, with other costs added on. The ANL methodology evaluates an assembled vehicle, using the vehicle manufacturing cost as the base cost. The ANL methodology also assigns additional costs to the outsourced components, whereas the treatment of such components is not clear in the EEA methodology. We have attempted to develop a common basis for the ANL and EEA methodologies by assigning shares of the final vehicle price, RPE in the EEA methodology, to individual cost categories similar to those listed in Table 1. Table 4 presents such a summary for the EEA methodology. Three cost contributors, ââ¬Å"Division Cost,â⬠ââ¬Å"Division Overhead,â⬠and ââ¬Å"Assembly Labor and Overhead,â⬠are combined under the ââ¬Å"Vehicle Manufacturingâ⬠category. Two cost contributors, ââ¬Å"Manufacturing Overheadâ⬠and ââ¬Å"Engineering, Tooling, and Facilities Expenses,â⬠combine to form the ââ¬Å"Overheadâ⬠category. The ââ¬Å"Dealer Marginâ⬠in the EEA methodology represents a factor applied to all manufacturer costs and profit. We assumed that this factor represents all costs of selling the vehicle. Although the profit is computed at the manufacturing level by EEA, we moved the profit to the bottom of the table to be consistent with prior tables. The cost allocation in Table 4 allows us to compute the in-house components cost multiplier as follows: Cost multiplier for in-house components = 100/(33. 7 + 6. 7 + 6. 5) = 2. 14 Page 5 To compute the cost multiplier for an outsourced component, one more assumption is necessary. In the ANL methodology, we assumed that the supplier will bear the costs of ââ¬Å"Warranty,â⬠ââ¬Å"RD Engineering,â⬠and ââ¬Å"Depreciation and Amortization. â⬠However, the EEA methodology does not identify the warranty cost separately. We assumed it to be half of ââ¬Å"Manufacturing Overheadâ⬠at 5. 05%. This, with the earlier assumption related to ââ¬Å"Engineering, Tooling, and Facilities Expenses,â⬠led to the following computation: Cost multiplier for outsourced components = 100/(33. 7 + 6. 7 + 6. 5 + 5. 05 + 12) = 1. 56. These multipliers, adapted from our extension of theE EA information on vehicle costs, are very close to those derived from the ANL and Borroni-Bird methodologies. Table 4 Contributors to Retail Price Equivalent in EEA Methodology Cost Category Cost Contributor a Vehicle Manufacturing Overhead Selling Sum of Costs Profit Manufacturing Profit Total Contribution to RPE a Division Cost a Division Overhead Assembly Labor and a Overhead Manufacturing Overhead Engineering, Tooling, and Facilities Expenses Dealer Margin Relative to Cost of Vehicle Manufacturing 0. 72 0. 14 0. 14 0. 22 0. 26 0. 49 1. 97 0. 17 2. 14 Share of RPE (%) 33. 7 6. 7 6. 5 10. 1 12. 0 22. 9 91. 9 8. 1 100. 0 These three cost contributors are scaled to sum to 1 in the third column, as in Table 1. Comparison of ANL and EEA Methodologies The information from Tables 1 and 4 is presented in terms of cost categories in Table 5 for easy comparison. The ââ¬Å"Vehicle Manufacturingâ⬠cost share is 46. 9% in the EEA methodology, compared with 50% in the ANL methodology. EEAââ¬â¢s RPE share of 22. 1% by overhead is lower than the ANL value of 24%. The cost of selling is 22. 9% in the EEA methodology, which is close to the ANL value of 23. 5%. The largest difference is in the RPE share by profit, which is 8. 1% in the EEA methodology, more than three times the ANL value of 2. 5%. According to Economic Indicators: The Motor Vehicleââ¬â¢s Role in the U. S. Economy (American Automobile Manufacturers Association 1998), the average net income before taxes for the three domestic manufacturers was 3. 9% during 1994-1997. Aside from vehicle sales, this value (3. 9%) includes income from spare parts sales and vehicle financing. Thus, the profit share appears very high in the EEA methodology. The absolute differences ââ¬â computed as ANL value minus EEA value ââ¬â are 3. 1% for component/material cost, 1. 9% for overhead, 0. 6% for selling, and ââ¬â5. 6% for profit. Page 6 Table 5 Comparison of Price Allocation by ANL and EEA Methodologies ANL Methodology Cost Contributor or Category Vehicle Manufacturing Production Overhead Corporate Overhead Selling Sum of Costs Profit MSRP SUMMARY An attempt to put three methodologies for automobile cost allocation on a common basis is presented in this technical memorandum. This comparison was carried out to verify the reasonableness of the cost multipliers used in ANLââ¬â¢s cost models for electric vehicles and hybrid electric vehicles. When put into a common format, by means of certain assumptions, the three approaches yielded the cost multipliers provided in Table 6. Table 6 Summary of Cost Multipliers Computed on a Common Basis Multiplier for In-House Components Outsourced Components ACKNOWLEDGMENT Funding for the analysis presented here was provided by the Planning and Assessment function of the Office of Transportation Technologies of the U. S. Department of Energy, managed by Dr. Philip Patterson. This technical memorandum is produced under U. S. Government contract No. W-31-109-Eng-38. REFERENCES American Automobile Manufacturers Association, 1998, Economic Indicators: The Motor Vehicleââ¬â¢s Role in the U. S. Economy, Detroit, Mich. Borroni-Bird, C. , 1996, ââ¬Å"Automotive Fuel Cell Requirements,â⬠Proceedings of the 1996 Automotive Technology Development Customersââ¬â¢ Coordination Meeting, U. S. Department of Energy, Office of Transportation Technologies, Washington, D. C. ANL 2. 00 1. 50 Borroni-Bird 2. 05 1. 56 EEA 2. 14 1. 56 EEA Methodology Share of Cost Contributor or Category MSRP (%) 50. 0 Vehicle Manufacturing 17. 0 Overhead 7. 0 23. 5 Selling 97. 5 Sum of Costs 2. 5 Profit 100. 0 RPE Share of RPE (%) 46. 9 22. 1 22. 9 91. 9 8. 1 100. 0 Page 7 Cuenca, R. M. , L. L. Gaines, and A. D. Vyas, 2000, Evaluation of Electric Vehicle Production and Operating Costs, Argonne National Laboratory Report ANL/ESD-41, Argonne, Ill. (to be published). Vyas, A. , R. Cuenca, and L. Gaines, 1998, ââ¬Å"An Assessment of Electric Vehicle Life Cycle Costs to Consumers,â⬠Proceedings of the 1998 Total Life Cycle Conference, SAE International Report P339, Warrendale, Penn. , pp. 161-172.
Monday, October 14, 2019
Characteristics of the Clothing Industry
Characteristics of the Clothing Industry The high quality fashion market is based on modern technology which has a relatively well paid labour force and designers with various degrees of flexibility. Many firms within this industry try to capture the market through various designs which is targeted at meeting the taste and preference of consumers. Most of the firms under the high quality fashion markets are in the developed and industrialized countries. The mass production low-quality/standard products markets are found in the developing countries. These categories are basically involved in the production of uniforms, under wears, t-shirts and many more. They are found in exporting zones working with major importers if the industrialized countries. Outsourcing in this market is basically to household productions, (Nordas, 2004). The Clothing industries operate under free import quotas. This means that both clothing and textile industries do not have to pay import tariffs when importing raw materials connected to clothing and textiles. These tariffs are made possible by the World Trade Organisation, to improve the importation of varied clothing among producing countries. As a result of the protectionism, many developing countries producing clothing were able to survive the industry. This however did not go well with the developed countries since there were great competition between the developing countries like China and the developed countries. On the part of employment, the industry has engaged the services of millions of people worldwide and also with other individuals who are not registered but work in their homes and factories. The industry was the first to trade on a global dimension, simply because of the low barriers in entering the production of clothing. The industry is governed by the international labour laws, employing the most sensitive part of the labour force with females and ethnic minority as the leading employees. Most of the employees are immigrants. The European community, and the US and UK also have blacks as the major employees of the industry. Most of the producing countries in the developing world have females as the majority of employees in the industry. As indicated above, the total labour force of the clothing industry is made up of 80% of women. This is largely due to the fact that women are immobile and therefore are able to take care of domestic chores. A greater number of the female workforce is also unskilled or semi-skilled. In the developing countries, many of the workers spend up to 12-14 hours per day and are paid with very low wages, THE PRODUCTION CIRCUIT The clothing industry is part of a large circuit which involves the production of textiles. The industry is more fragmented organisationally and less technological in nature. The industry outsource most of it components and products. The garment industry therefore produces to unpredicted consumer markets. The industry serves as a distribution point for all garments. Through retailer efforts, the organisationà ¢Ã¢â ¬Ã¢â ¢s geography has been shaped accordingly. The industry is also known as a buyer driven industry, in the sense that they purchase most of the raw materials from producing countries worldwide. There are six stages that individual producing countries have passed through, that is from the embryonic stage to the maturity and decline stage of the development process of the clothing industry. This can be seen in (Figure 1 below). The stages indicate how raw materials flow within the industry, from the fabric production stage, design, preparation, production, distribution and consumption stage. In the reverse state is the information flow from customer orders down to the fabric production stage. There is no much technological change since inception of the clothing industry. The majority still uses the manual operations due to the complex nature of the production process. The clothing industry can be related to a supply chain function, where activities flow from raw materials to textile designs, apparel plants through distribution centers and other retail stores to consumers. The chain is seen as an integrated network of marketing from production stage to the finish product to consumers. The various activities are located where each can be able to make a contribution to the value of the finished product. The various variables considered in the industry include quality, cost, reliability, access to quality inputs and transportation cost. From the figure 2 above, the black lines represents the flow of goods whereas the white lines represent the flow of information. The arrows indicate Demand-Pull System, where the design of a product is made from customer orders, (Nordas, 2004). The supply chain indicates the interplay of several companies, where logistics and other services are coordinated. In the industrialized countries, most companies engage the ser vices of consultants or independent service providers in the provision of logistics. PRODUCTION COST AND TECHNOLOGY The clothing industry is characterized by low intensity of capital and high intensity of labour. The plant size is very small with simple technology. Figure 4 represent percentage of leading exporters of Clothing worldwide. The figure compares percentage of 2000 and 2011. Asia dominates the clothing industry in-terms of exports with over 50% of world market. China has doubled their share within 11years of operation, with approx. 37% of the total exports worldwide. Closely followed is the European Union and Euro extra with a combined total of 35% of world export share, which I a combination of intra regional exports. Figure 5 represents share in value for exporters for 2011. China leads with 38% representing 154 billion Dollars in 2011, (www.wto.org) European union closely follows with 36% of Share in value representing 144billion US Dollars including intra regional trade. Bangladesh also did better in 2011 with a share in value of 5%, representing an amount of 20billion US Dollars, www.wto.org). LEADING IMPORTERS ( SHARE IN VALUE AND PERCENTAGE) The EU is the leading importer of clothing worldwide, with combined percentage of 67.2% of total imports. The EU imports much of its clothing from China. Available records indicates that EU imports about 39% if Clothing from China, 14% from Turkey, 7.7% from India, 6.3% from Bangladesh and 3.6% from Tunisia, ( www.ec.europa.eu). It is also evidenced that China exports clothing more than imports. Whereas China leads in exporting clothing, in-terms of imports, they only imports about 0.90% of world clothing. The US is the second largest importer of clothing as evidenced on figure 4 above. The US imports about 20.5% of clothing in the country, followed by Japan with 7.6%. The remaining countries imports less than 3% worldwide respectively, (WTO 2011 chart II.69) The share in value for the leading importer of clothing (EU) is 60%, representing an amount of 290Billion Dollars. The EU is therefore the largest importer of clothing worldwide. The US is the second largest importer of clothing with about 18% share in value, representing 89 Billion US Dollars TOP TEN SUPPLIERS The clothing industry has about ten major suppliers. China plays a leading role with about 29.45million Euros in 2011 as compared to 2007 where it made a supply of approximately 21.9million Euros. Bangladesh also improved in their supply in 2011 with 7.5million Euros as compared with 2007 with a supply of 4.4million Euros. India also had a slight increase in supply for 2011 with approximately 4.5million Euros as compared to 2007 where the supply was approx. 3.8million Euros. However, Turkey had a decline in supply in 2011 with an amount of 8.2million Euros as compared with 2007 with approx. 8.9million Euros. Other countries like Indonesia, Sri Lanka, Pakistan and Vietnam had their supply below 2million Euros as evidenced on figure 2. Top 10 suppliers in clothing (million Euros) Basic characteristics of the industry (share in value added and employment, structure andà characteristics of the production process) The role of trade policy (multilateral tariffs and quotas, à ¢Ã¢â ¬Ã
âgrey area protectionism, trade conflicts, preferential trade, etc.) Trade policies are rules and regulations governing the operations of international trade among countries worldwide. Trade policies play a major role in the industrialization of the clothing and textiles market. Regarding market access, trade policies TEXTILES AND CLOTHING AGREEMENT The textiles and clothing industry has long history in-terms of agreement for protection in trade across the US and Europe. Voluntary export restraints were agreed upon by China, Japan, Hong Kong, and India to enable them export cotton products to the US in the 1950s. The General Agreement on Trade and Tariffs were incorporated in the agreement with the Long Term Agreement (LTA) on Cotton. This agreement was later replaced by the Multi-Fibre Agreement in 1974, (Nordas, 2004). The main purpose of the MFA was to open up the restricted markets so to limit the disruptions of markets. The MFA was also extended to cover all man-made fibres in-terms of restrictions. However, according to Nordas 2004, the MFA violated the multilateral system principles as follows: The most favoured principle was not adhered to Instead applying tariffs, it rather applied quantitative restrictions Developing countries were discriminated against It was not also very transparent for easy understanding By 1st January, 2005, the Textiles and Clothing were fully integrated in GATT which also gave way for quotas to be fully integrated making it easy for member countries to trade without trade barriers. In the views of Nordas, the eliminating quotas lead to welfare economic gains of about 42% of the Uruguay round liberation, and about 65% for dynamic models. In her view, Nordas indicated that much of the Welfare gains went to the importing countries where as the exporting countries made welfare loss through the static version of the model and welfare gain through the dynamic model. A tripartite committee report on promoting fair globalization in textiles and clothing indicates that phasing out quotas will benefit China, being the leader in exporting of clothing in the industry, where as the importing countries will lose market share, (www.ilo.org) . The Agreement on Textiles and Clothing (ATC) ended in 2004, which led to an increase in competition in the clothing market. Some countries were affected as a result of the new entrants of the Asian countries like Vietnam and Cambodia, and other competitors like India and Bangladesh which are traditional exporters. This led to a decline in the importation of clothing from the affected countries by the US at an annual rate of 13.4%. With the implementation of Preferential Trade Agreements (PTAs) which were imposed by the US and EU on the importation of textiles and clothing from China, inroads were created for some developing countries to experience marginal growth in their exports. The PTAs also made it possible for small countries like Madagascar and Haiti to increase their exports by 26% and 15% respectively, (www.ito.org). THE FREE TRADE AGREEMENT The US Free Trade Agreements has given the textiles and apparel industry the opportunity to enter in the world market and compete freely. The agreement enables the reduction of tariffs rates and improves the intellectual property rules and regulations, (Web.ita.doc.gov). The US has therefore signed agreements with the following countries and Institutions on textile and clothing industry. Notable among them are; Australia, Bahrain, CAFTA-DR, Chile, Colombia, Israel, Korea, Morocco, NAFTA, Oman, Panama, Peru and Singapore, (www.otexa.ita.doc). These agreements assist foreign governments to ensure that non-discriminating laws and regulations are enforced to streamline trade relations between the US and member countries, (www.otexa.ita.doc). The FTA provides that transparent measures be put in place for effective rules to be enforced. The FTA also ensures that all non-tariff barriers are removed completely, which opens the markets of the member countries to the US products. Under this ag reement, all goods that qualify are said to be duty free the US markets.
Sunday, October 13, 2019
Canturberry Tales - The Nuns Priests Tale Essay -- Nunââ¬â¢s Priestââ¬â¢s T
Canturberry Talesà à - The Nun's Priest's Taleà à à This is a charming little fable cleverly disguised as a barnyard story.à In the first twenty-six lines, the setting of the story is described as a small farm, belonging to a very plain widow and her two daughters.à The widow is a simple woman of good heath, who has managed to make it despite her unfortunate circumstance of being slightly impoverished.à In lines twenty-seven through forty-four we are introduced to the story's main character, Chanticleer.à He was in fact an exceptional rooster who was blessed with an equally exceptional crow.à In lines forty-five through fifty-nine we learn that Chanticleer is the master of his domain.à However, as we read on it is found that the key to his heart belongs to the Lady Pertelote, indirectly characterized as the perfect woman.à The next two lines are a dead give away that the story is in fact, a fable, lending onomatopoetic devises to the barnyard members.à Line sixty-two finally brings us to the actual story.à One morning right before dawn, Chanticleer awoke in sheer terror.à Of course Lady Pertelote was considerably concerned, and questioned her true love as to what the problem was.à Chanticleer goes on to describe a very vivid, very disturbing dream.à In fact it was a premonition of his own untimely death.à Upon hearing the cause of Chanticleer's fright, Lady Pertelote becomes slightly upset.à Actually she downright enraged.à How, she wondered, could such an amazing animal be scarred of one little dream, especially since it was most likely caused by something he ate.à Basically, she told him he was a big cowar... ...indeed going to eat him, he'd better do it before the lynch mob caught him.à The fox readily agrees and as he is about to swallow Chanticleer, the clever little bird flies to the sanctuary of a nearby tree.à At the thought of loosing his meal, the fox tries in vain to trick Chanticleer again by suggesting he was merely excited at the prospect of hearing his wonderful voice, and accidentally grabbed him too hard.à Fortunately, our hero has learned his lesson, and is not to be deceived so easily ever again.à There is more than one lesson to be learned from Chanticleer's story.à One theory being that one should trust one's own intuition and let it be their guide.à Another lesson learned is that you should never let your pride interfere with your judgement.à So ends the first story of Chaucer's The Canterbury Tales.à Ã
Subscribe to:
Posts (Atom)